Video-products RJ45-5EWTP-QR-PCB Manuel d'utilisateur télécharger pdf

Weatherproof Cable Shield Assembly Procedure

For Outdoor CAT5/5e/6/6a Shielded Cable Installations

The Weatherproof Cable Shield is a water-tight cable restraint to be applied to

shielded Cat5/5e/6/6a cable to make a weatherproof cable connection to outdoor enclosures.

To make sure the connection is waterproof upon completion, follow the steps below.

1. Insert the seal ring into the housing.

2. Strip the CATx shielded cable jacket (6mm-7mm O.D.) approximately ½” and insert the cable through the

sealing nut, screw nut, and housing. (Note: Heat shrink tubing can be applied to cable to increase the O.D. to

6mm-7mm.)

3. Terminate the CATx shielded cable with an RJ45 connector.

housing

screw nut sealing nut

strip approx. ½”

CATx cable

Note: CATx cable

used must be

shielded cable.

Tel: 330-562-2622

www.vpi.us

1275 Danner Drive

Fax: 330-562-1999

VPI

VIDEO

PRODUCTS

INCOR POR ATE D

Aurora,Ohio 44202

1 2

Weatherproof Cable Shield Assembly Procedure For Outdoor CAT5/5e/6/6a Shielded Cable Installations The Weatherproof Cable Shield is a water-tig

4. Set the RJ45 connector into the housing such that the snap handle is in the notch. 5. Make certain that the seal ring is fully-seated i

Pas de commentaire

Video-products RJ45-5EWTP-QR-PCB Manuel d'utilisateur